UNBRICK OnePlus 7T Pro Europe 10.0.5 (Dead Boot Repair)

Is your OnePlus 7T Pro stuck in a dead boot state or not responding after a failed update or flash? This guide will help you recover (unbrick) your OnePlus 7T Pro (Europe variant) running OxygenOS 10.0.5, using a Qualcomm emergency download (EDL) method.

What You’ll Need:

• A PC running Windows
• Qualcomm drivers
• OnePlus 7T Pro 10.0.5 EDL Firmware (Europe variant)
  •  Download Firmware (Google Drive)
• QDLoader HS-USB  Drivers (Qualcomm)
• MSM Download Tool
• A USB cable

• Step-by-Step Instructions

  1. ✅ Install Qualcomm USB Drivers

  1. Download and install Qualcomm QDLoader HS-USB drivers.
  2. Reboot your PC after installation.

   

  Tip: On Windows 10/11, you may need to disable driver signature enforcement to install unsigned drivers.

  ---

  2. Download and Extract the Firmware

  • Download the OnePlus 7T Pro 10.0.5 EDL firmware from the Google Drive link.
  • Extract the ZIP file using 7-Zip or WinRAR.

  You should see:

  • MSMDownloadTool.exe
  • EDL firmware folder
  • Other necessary flashing files

   

  ---

  3. Boot into EDL Mode (Emergency Download Mode)

  Also read :Download HUAWEI ALL CPU Repair Chip_Kirin (Damaged) – FREE

  If the phone is completely dead:

  • Method 1 (Button Combo):
    • Hold Volume Up + Volume Down together.
    • Connect the phone to the PC via USB while holding both buttons.
  • Method 2 (Test Point – Advanced users):

    • Open the back panel of the phone.

    • Short the test points using tweezers and connect USB.

    • 4. ⚙️ Flash with MSM Download Tool

      1. Run MSMDownloadTool.exe as Administrator.
      2. Select your target variant if prompted (Europe).
      3. Click Start to begin flashing.
      4. Wait patiently — flashing may take several minutes.

      Do not unplug or disturb the phone during this process.

      5. ✅ Boot Up and Initial Setup

      Software installation services